Skip to main content

How to make a face mask without a sewing machine

By Sewing machine

This story has been updated. It was first published on June 10, 2020.

As vaccines continue to roll out, the highly contagious delta variant continues to spread across the country. COVID-19-related hospitalizations have doubled in the past two weeks in the United States alone, and some states have reinstated the requirement for masks for all indoor activities, for both vaccinated and unvaccinated people. This is in line with the Centers for Disease Control and Prevention guidelines which recommend that everyone wear face coverings anywhere social distancing is not possible, even outdoors.

We still have a long way to go to overcome this pandemic, especially when not everyone has access to the vaccine. Children now represent 19% of new COVID-19 cases in the United States, and the Food and Drug Administration has yet to approve a vaccine for children under 12. This makes them particularly vulnerable and dependent on other prevention methods such as mask wearing and social distancing, especially as schools begin to reopen in September.

Masks are still an integral part of our lives and are a great way to protect yourself and everyone in your community from COVID-19. Whether it’s for yourself or the little ones in your house, you can easily make your own face masks – no sewing machine is needed.

How to make a mask for children and adults

Recent studies have been able to confirm that fabric masks can reduce the number of droplets that diffuse in the air and that can carry the coronavirus. This is why it is better to wear a cloth mask than not to wear a mask at all.

The CDC recommends these face covers as long as they fit properly, consist of two or more layers of fabric, and do not have valves. But let’s be clear: Masks, no matter how effective, aren’t guaranteed to protect you from COVID-19 if you don’t supplement them with social distancing and good hand hygiene.

[Related: How to wear a face mask for maximum protection]

And good hygiene also extends to sheet masks. Everyone, especially those caring for a sick loved one, should have at least two face covers so they can sterilize one while wearing the other.

Our tutorial is a simple project for people who don’t have a sewing machine, adapted from MakerMask by Helpful Engineering, a global open source COVID-19 project.


  • Time: 90 minutes if sewn by hand
  • Material cost: less than $ 5
  • Difficulty: way
  • Needle and thread
  • Scissors
  • Rule
  • Iron
  • Sewing or safety pins
  • Permanent marker
  • (Optional) Seam ripper


(Optional) 60 inches of tape, between ½ to 1 inch wide


You probably have everything you need to make one at home. Alden wicker

1. Wash the reusable grocery bag.

  • Warning: We specifically recommend a reusable, non-woven polypropylene (NWPP for short) grocery bag, not a disposable plastic bag. It may seem obvious, but you will need to be able to breathe through the mask. Stay away from cooler bags (these usually have foil inside) and waterproof bags lined with plastic.
  • To note: If you can, choose the bag with the longest handles you can find. This project will be easier if you can use them as straps for the mask. If the handles are not long enough, we will show you how to make tape straps.

2. Cut the sides of the grocery bag so that the material is flat. Do not cut the handles.

3. Cut the material into two sheets. If your bag has a seam at the bottom, cut it like you did for the side seams. You will end up with two clean sheets of NWPP, each with its own handle.

DIY face mask made from polypropylene bag
Your mask will have two layers of fabric. Alden wicker

4. Measure and cut a sheet. Using your ruler, measure the top edge of the bag to find the center. Mark it with your permanent marker. Using this as a starting point, measure back towards each handle 4½ inches and mark again. From each mark measure 9 inches and draw parallel vertical cut lines. Connect the lines at the bottom. You should have a 9 x 9 inch square with a finished (stitched) edge at the top with the handle.

  • For child size masks (5 to 12 years old): Using the exact middle of the top edge of your bag as a starting point, measure back to each handle 3½ inches and mark the fabric. From each mark measure 7 inches and draw parallel vertical cut lines. Connect the lines at the bottom. You should have a 7 x 7 inch square with a finished (stitched) edge at the top with the handle.
  • To note: If your handle is too far apart to fit inside the square you measured, the easiest solution is to use tape (Step 9).

5. Repeat step 4 on the other sheet of material.

6. Sew the side seams of the mask. Place a sheet with the wrong side (the old inside of the bag) facing up and fold up a half inch of material from the edge opposite the handle. Iron the fold over low heat to secure it. Then sew it a quarter of an inch from the edge. Place the other sheet with the right side (the old outside of the bag) facing up and, like the other sheet, fold it half an inch, iron it and sew it a quarter inch from the edge.

  • Warning: Polypropylene is a type of plastic. Using a high heat setting will cause it to melt, ruining your project and, quite possibly, your iron. If there is no “poly” setting, try the lowest (usually silk) and increase it slightly if the crease does not set.
  • To note: If you are not using your bag handles, take each of your squares and sew the seams on the two opposite sides as shown.
DIY facial mask fold
Adjust each fold with an iron, but be sure to use the correct temperature. Alden wicker

7. Place the sheets together. Your mask will have two layers of fabric. Place one of the sheets on your countertop with the handle facing left. Place the other top with the handle facing to the right. Pin in place.

  • To note: We recommend that the printed side of the sheets face the same direction, so that the back of the mask is a different color than the front. This will help you not to accidentally put the mask on the wrong way, with the contaminated side against your mouth and nose.
DIY face mask with pins
Pin the fabric sheets together. This will make the sewing much easier. Alden wicker

8. Make the ties. Fold the handles in half and cut them in the center. Hold the mask centered on your face with the handles protruding from the sides and make sure the handles are long enough to reach the back of your head with at least 4 inches of free space.

9. (Optional) Make straps with tape. If the handles on your bag are not long enough to become straps, or if you are not using the bag handles at all, you will need to make your own head ties. If insufficient handles are still attached to your NWPP sheets, cut them off or use a seam ripper to remove them. Hold the mask in the center of your face and use your tape measure to determine the length of each strap – they should each be long enough to go from the edge of your face to the back of your head with at least four extra inches to attach . Cut the ribbons and pin them where the handles were. Check the fit by putting on your mask. If the length of the ribbons is correct, double your thread and sew the pieces in place on the wrong side of the leaves.

10. Sew the sheets together. Double your thread and sew on all edges.

11. Finish the bottom edge. Like you did in Step 6, make a half-inch crease at the bottom and iron it. Sew it closed a quarter of an inch from the edge.

12. Make the adjustable noseband. Again, fold over half an inch from the top edge and iron it. Twist the pipe cleaners or ties together and cut them to the same width as the mask. Fold their ends to blunt them. Tuck the metal ties inside the fold and pin the fold over them. Then, sew the fold below and to the sides of the ties to hold them in place.

DIY Facial Mask Nose Adapter
Those twist ties that you accumulate every time you buy a loaf of bread can make the perfect noseband. Alden wicker

12. Make three folds to crimp the mask for expansion. The pleats should be about 1 ½ inch wide on the outside, half an inch wide on the inside, and parallel to the noseband. If it helps, draw lines on your fabric, fold them, then iron them in place. Sew them in place, sewing both sides a quarter inch from the edge. This time, double your stitch to make sure the fold seam is secure.

  • For child size masks (5 to 12 years old): Holds creases about 1 inch wide on the outside and half an inch wide on the inside. Make sure it is not too big by asking the child to try it out. Adjust the pleats if necessary and pin them before setting and sewing.
DIY face mask final folding
Make three folds on your mask and secure them with an iron. Alden wicker

13. Sterilize your mask. Before using it for the first time, soak your mask in boiling water for 5 minutes. Repeat this step between uses. For other methods, check out our guide on how to disinfect face masks.

It is important to remember that a face mask on its own is not enough. Make sure you never touch the part of the liner that covers your nose and mouth, and when you are done using it, sterilize it, let it dry completely (in the sun if you have access to it) to avoid any bacterial growth. Finally, store the mask in a clean, plastic, resealable container.

This DIY mask is not meant to be donated to a hospital, but kept for yourself, your family, and your community.

The difference between N95 and surgical masks

If you’re wondering about other types of face covers, let’s talk about N95 respirators and surgical masks. N95s are hard masks with a filter that blocks 95% of airborne particles and are tested for every healthcare professional to ensure they create a tight barrier. Like most personal protective equipment (PPE), N95 masks are intended to be discarded after each use.

In contrast, surgical masks are loose coverings of melt-blown pleated fabric: a fine mesh of synthetic polymer fibers that allows the wearer to breathe while blocking tiny particles that could carry the virus. However, they don’t fit as tightly as N95 respirators, so they won’t offer the same protection against the small airborne particles that can carry the coronavirus, which can linger in the air for minutes. at hours.

[Related: Why you shouldn’t ever wear your mask around your neck]

Surgical masks are not meant to protect the wearer from infection, but to protect others by retaining infectious droplets that may come out of your mouth or nose, whether or not you are symptomatic.

No matter what you wear, please follow the instructions of your local authorities and remember that getting the COVID-19 vaccine, social distancing, washing your hands thoroughly and staying at home are always the best ways. to protect yourself and your family from the virus.

Source link

Painter has sewing needle stuck in liver for 15 years

By Sewing needle

PAINTER Terry Preston has had a sewing needle stuck in his liver for at least 15 years – not knowing how it got there.

Experts said he may have even swallowed it unknowingly when he was a child.


Painter found he had a sewing needle in his liver, which had been stuck for at least 15 yearsCredit: Kevin Dunnett
Terry Preston, 54, has no idea how he got there but cannot withdraw the 5.7cm needle despite the pain


Terry Preston, 54, has no idea how he got there but cannot withdraw the 5.7cm needle despite the painCredit: Kevin Dunnett

Terry, 54, said: “My first thought was that one time maybe I got so drunk I rolled over or something!”

“Even then, I don’t know how it would reach my liver, but somehow it does.”

It was discovered in 2019 when he went to the hospital with a suspicion of pancreatitis. Doctors rechecked and it appeared in scans dating back to 2006.

Terry, from Walton-on-Thames, Surrey, said: “I couldn’t believe it when I saw it. I didn’t know it was there. “

He says he is in pain now and wants to remove the 5.7cm needle.

But doctors believe the discomfort may be psychological because he now knows he’s there. And they say an operation would be risky.

Expert Dr Raghib Ali said: “Small foreign objects can be absorbed in the liver through the intestine.

“They can pass through the stomach and intestine and lodge in the liver, but this is extremely unusual as they normally pass out from behind.

“The liver will have isolated this needle, so it won’t cause damage. And since the liver contains so many blood vessels, cutting it can be far more dangerous than leaving it there.

Katie Price grimaces in agony as £ 700 needle beauty treatment leaves her face bleeding
Source link

Sewing machine day

By Sewing machine

Long ago, when mankind started working with fibers to produce clothes, things were long and arduous. The fiber had to be laboriously broken down and spun into yarn and yarn, then into yarn woven into fabric. This fabric would then be cut and sewn using a needle and thread, with someone painstakingly selecting each stitch by hand. Then something extraordinary happened, the sewing machine was invented, and with it the process of making clothes became more and more efficient. Sewing Machine Day celebrates the invention of this amazing device.

Grandma probably had one, and she probably learned how to use them at a very young age, too. Remember how it was always Grandma, with a pair that was the only one that effectively threaded a needle and how she could take that new pair of pants you needed for the school play? This is because sewing machines have long been a staple in fashion and back in the days when most young women worked in garment factories. Today, this traditional tool is still used in some industries and, of course, also makes a wonderful statement piece in a home.

Well first, if you are an experienced seamstress or tailor, take the time to work with a piece of fabric without the benefit of a sewing machine. It might seem like an odd way to celebrate a device that made this method unnecessary, but when you’re done you will no doubt realize how important the sewing machine is in your daily life. Alternatively, if you’ve never sewed a stitch in your life, now is the time to finally pick a craft that will serve you well for the rest of your life. Make it an opportunity to ask your grandma for patterns and designs to work on, or ask her if the old sewing machine she put in her closet still works, chances are it does and it will give you the chance to learn how to be a real seamstress and give you the opportunity to tell you all the stories of her past and how she came to own one of these lovely machines.

Source link

Platinum Equity to Acquire Global Sewing Machine Manufacturer SVP Worldwide

By Sewing machine

LOS ANGELES – June 10, 2021 – Platinum Equity today announced a definitive agreement to acquire a majority stake in SVP-Singer Holdings Inc. and its wholly-owned subsidiaries (SVP Worldwide), a consumer sewing machine company. The existing shareholders and management have retained a significant stake in the capital. Financial terms were not disclosed. The transaction is expected to be finalized in the third quarter of 2021.

SVP Worldwide represents more than one in three consumer sewing machines sold worldwide through three iconic brands: SINGER®, VIKING® and PFAFF®. The Company’s products are sold through a network of sewing machine dealers, mass retailers, specialty stores, online retailers, distributors and the 180 retail stores operated in-house by the Company.

SVP Global CEO Carl-Martin Lindahl and Executive Chairman Stan Rosenzweig, both of whom joined the company in 2018, will continue in their roles following the change in ownership.

“The company has recently made impressive progress investing in technology and product development, and is on the cusp of a new stage of growth fueled by innovation and continuous operational transformation,” said Jason Price, Managing Director of Platinum Equity. “Carl-Martin, Stan and the entire SVP Worldwide team have done a great job refocusing the business and setting the stage for the next chapter. We fully support the investments they have made and will provide additional financial and operational resources to help accelerate their efforts.

With headquarters in Nashville, Tennessee, and regional headquarters and sales offices in Milan, Shanghai and Mexico City, SVP Worldwide is a global company serving consumers in more than 180 countries. The company’s activities include manufacturing facilities in Asia and Latin America, several R&D centers, including a new state-of-the-art facility in Sweden, a software development center in the UK and a global supply chain with distribution centers in all regions. .

“We have made good progress in re-energizing our product development capabilities and redoubling our commitment to our dealers and retail partners, but there is still a lot of work to be done,” said Lindahl. “We are delighted with the opportunity to work with the Platinum team, which will bring new perspectives and expertise and further expand our playbook.”

Rosenzweig, whose family has been involved in the sewing industry for three generations, added that he was optimistic about the growth trends in the sector.

“Technology is making sewing more accessible to a wider population with a new demand motivated in part by the interest of a young generation attracted by personalization, self-expression and opportunities to showcase their creativity”, Rosenzweig said. “In developing markets, growth is also being fueled by the emergence of a middle class and a ‘need to sew’ segment that uses sewing machines to generate income. It is an exciting time for the industry.

In addition to organic growth opportunities, Platinum Equity plans to use its M&A resources to help the business grow.

“An upcoming list of exciting new products positions the SVP Worldwide brands to gain market share, and we also believe there are additional avenues for growth through complementary acquisitions, particularly in sewing-related accessories and other products, ”added Price.

Latham and Watkins is legal counsel to Platinum Equity in connection with the acquisition of SVP Worldwide. BofA Securities is financing the transaction.

Sawaya Partners LLC is acting as exclusive financial advisor and Morgan Lewis as legal advisor to SVP Worldwide with respect to the transaction.

Posted on June 10, 2021

Source: Platinum Action

Source link

Japanese companies collaborate to develop their sewing machine business

By Sewing machine
Juki Corporation and Pegasus Sewing Machine Mfg have entered into a basic business alliance agreement to focus on the industrial sewing machine sector. As part of this collaboration, the two companies will work to improve the skills of sewing operators and improve their working environment. Both will work to develop the market in emerging economies.

As a comprehensive manufacturer of industrial sewing machines, Juki provides sewing machines and related equipment and systems as in-line solutions to customers in the garment and non-garment sewing industries in more than 185 countries.

Pegasus is a leading company specializing in chain stitch sewing machines for over 100 years since its inception. Knitwear related customers with expanding businesses continue to use Pegasus products.

Grasping the progress of digital and IoT innovations, the arrival of the new normal society adapted to the COVID-19 pandemic and the economic recovery movements, the two companies will work together to support the development of the sewing industry as the one of the engines that will drive the recovery. The two companies will also collaborate to develop solutions activities geared towards achieving the SDGs, with a view to solving social problems mainly in emerging countries.

As part of this collaboration, the two companies will work to improve the skills of sewing operators and improve their working environment, creating a production management system that allows a fine response to fluctuations in demand and the construction of an infrastructure for saving resources and energy throughout the sewing factories.

The two will collaborate in the development of markets in emerging countries by establishing a sales and service network in the markets of emerging countries by using and complementing each other with the management resources of the two companies, and jointly developing products for the markets. emerging.

Collaboration in product development will involve a common focus on digitizing and networking chainstitch machines, and participating in future large-scale exhibitions for their products. The two will also collaborate on the planning and development of chain stitch sewing machines.

Fibre2Fashion Information Office (SV)

Juki Corporation and Pegasus Sewing Machine Mfg have entered into a basic business alliance agreement to focus on the industrial sewing machine sector. As part of this collaboration, the two companies will work to improve the skills of sewing operators and improve their working environment. Both will work to develop the market in emerging economies.

Source link

10 amazing gifts to Maek using a sewing machine

By Sewing machine

The best gifts are those made with love. No one said a store-bought gift was a bad idea, but people seem to appreciate handmade gifts more because of the thoughtfulness and energy that goes into them. If you want to give a gift that is thoughtful, beautiful, and doesn’t break the bank, keep reading to see the creative options.

A reusable fabric cover will help anyone carry dishes to a family event or social gathering in style. It’s so easy to make them that we recommend that you make a set of 4-6 blankets as a gift box.

Who is it for

The grandmothers and mothers who cook for the gatherings.

What you are going to need

– Large square of fabric

– Double fold ribbon

– Rotary knife

– Thin elastic

– Safety pin

– Sewing machine

How to do it

– Place a guide bowl on the fabric and cut a circle about 2 inches wider than the bowl.

– Sew the bias around the edge of the fabric. Leave a space the size of a safety pin.

– Measure and cut the elastic. Stick a safety pin on it and thread the bias tape. Sew the edges together and close the space in the bias tape.

You can mix the design of this gift to fit the receiver. It can be a solid color, a unique pattern or a quilt. You can also fill it with fiber or rice for more flexibility.

Who is it for

A great traveler.

What you are going to need

– Travel pillow pattern

– tissue fragments

– Padding (fiberfill or alternative)

– one-sided fusible fleece

– Basic sewing material

– The scissors

How to do it

– Print the pillow pattern. Place it on a large piece of fabric and cut out a back.

– Cut the fabric fragments into equal squares and arrange them.

– Using a layout that matches your pillow pattern, sew the squares together to form rows. Sew the rows together to make 1 piece.

– Use the back to cut out the front of the patchwork.

– Apply the iron-on patch on the back of the back. Repeat for the front.

– Place the two pieces right sides together and pin. Sew all around, leaving a 3 inch opening for the stuffing.

– Turn right and iron the seams.

– Stuff the pillow and close the opening with a hand stitch.

Not all sewing gifts have to be fabric. This simple rustic leather phone pouch is simple and elegant. You can use scraps of leather from an old project or reuse an old handbag.

Who is it for

A simple and elegant lady.

What you are going to need

– 7 inch white lace

– A few pieces of leather

– White cotton thread

– Magnetic button

– Leather glue

– Eyelet punch

How to do it

– Cut two pieces of leather to the desired size of the pouch.

– Overlap them and drill holes along the sides and bottom.

– Tie the two pieces together with the thread point.

– Cut a piece of leather to close the pocket and glue it to the back of the pocket.

– Measure the location of the button and paste it. Cover the inside with a piece of cloth so as not to scratch the phone.

– Measure, cut and glue on the decorative lace to finish.

You can use faux leather or the real deal on this gift and match a color scheme that will suit the personality of the recipient. You can also make it to specific dimensions for their laptop.

Who is it for

Anyone with a laptop.

What you are going to need

– Colored canvas

– lining

– Leather fall

– ¼ inch thick foam

– Button

– Rotary knife

– Binding clips

How to do it

– Cut the leather and the canvas to the desired dimensions. Make 2 pieces each.

– Use the binding clips to hold the leather and canvas together. Sew each set together.

– Use a round cutting guide to round the bottom of the edges of the leather.

– Place both sides right sides together and sew the edges together except the top.

– Cut the seam allowance and notch the edges. Turn the pouch right side up.

– Cut 2 pieces each of fabric lining and foam. Pin the foam on the wrong side and round the bottom corners. Sew together to make the lining and the trim.

– Slide the liner inside the case back to back.

– Cut a strip of leather and slip 1 inch between the lining and the pouch. Sew the top lining of the pocket closed including the strap.

– Measure the button and cut a hole in the strap. Sew the button on the pocket and close the clasp.

Scarf with hidden pocket

Not all women want to walk around with a handbag all day. This unique gift will serve in cold weather, spruce up the style and provide an extra pocket for accessories.

Who is it for

An elegant lady who doesn’t carry handbags.

What you are going to need

– Basic sewing material

– Outer fabric

– Inner lining

– Zipper

How to do it

– Cut the two fabrics to the desired size and length.

– Position the zip on the outside of the scarf and sew one side down.

– Superimpose the fabrics right sides together, pin and sew. Leave the zip open.

– Trim the seam allowance and edges. Pull the zipper to return to the right side.

– Pin the bottom of the zip and sew to create a pocket.

Children can forget about fragile chess boards and weak chess pieces with this beautiful gift set. It can also be used as a game of checkers.

Who is it for

Children who love chess

What you are going to need

– Flannel quarters in 4 colors

– Thread

– Bottle caps

– Wax or sharpie paper

How to do it

– Choose 2 colors for the checkerboard and cut 4 strips each. Sew the long side of the opposite colors together. Repeat, alternating colors with the other bands.

– Cut the patched strips crosswise into 8 strips. Turn the strips over to form a chessboard and sew again.

– Cut a back in a third flannel. Pin it to the chessboard and sew.

– Connect the chessboard with the fourth flannel.

– Draw chess symbols on the bottle caps.

If you have a lot of fabric scraps from working on different sewing projects, you don’t have to throw them away! This gift requires different styles to achieve that patchwork look.

Who is it for

Adults and adolescents.

What you are going to need

– Different fabrics

How to do it

– Cut 32 squares from different fabrics (2 squares per fabric) and separate them into 2 sets.

– Sew 4 rows of 4 squares each. Iron the seams in the same direction and sew the 4 rows together. Open press seams.

– Repeat for the second set of squares.

– Sew the right side to right side, cut the lower corners and turn the bag over.

– Cut 2 pieces of fabric for the sheath of the cords. Fold them and sew them to the top of the bag

– Cut 2 squares for the wrong side.

– Place them right sides together and sew 2 edges. Cut off the corners and put them in your bag. Line up an open edge with the top of the bag and sew to secure it.

– Turn right through the last opening. Sew the opening by hand.

Prepare 2 long cords and thread the cord sheath. Tie the edges together.

This is another amazing use of scrap fabric. The dimensions used here are for a 64 inch x 80 inch quilt. Measurements can be changed to get a larger or smaller size.

Who is it for

Anyone as a Christmas present

What you are going to need

– 160 squares of printed fabric (4 ½ inches)

– 20 squares of sturdy fabric (2 ½ inches)

– 20 squares of white fabric (2 ½ inches)

How to do it

– Combine each plain fabric with a white fabric. Sew together to make 20 strips. Press the seams.

– Cut each strip into 16 2 ½ inch x 4 ½ inch pieces to make 320 pieces. Sew 2 pieces each together. This will make 160 pieces with 4 patch blocks.

– Match each set of patch blocks with 1 set of printed fabric. Sew together and iron the seams.

– Assemble the pieces in 20 rows of 8 blocks. Pin the seams.

– Sew everything together to finish.

This custom camera strap is not only padded for comfort, but you can also customize the style with any fabric to fit the receiver.

Who is it for

A photographer or camera enthusiast

What you are going to need

– Printed fabric

– Solid color fabric

– Matching yarn

– Thin fusible fleece

– The scissors

– The iron

How to do it

– Cut 1 piece of printed and solid fabric. Place them right sides together and sew the long edges. Put aside.

– Cut the 1 inch iron-on fleece. Make it 2 inches shorter and 1 inch thinner than the other fabrics. Place in the center of the sewn fabrics, plain side and iron with an iron.

– Let the hot fleece cool. Turn right and press the seams.

– Tuck in the open edges and sew.

– Fold the strap in half lengthwise. Make sure the printed fabric is on the outside.

– Sew the open edges.

Sunglasses can be quite expensive. You can put a pair in this case or just gift the case to a friend who is in desperate need of it.

Who is it for

A fan of sunglasses

What you are going to need

– 2 assorted fabric scraps

– iron-on fleece

How to do it

– Cut each fabric into 2 matching rectangles. Place right sides together and pair it with iron-on fleece cut ½ inch smaller on all sides.

– Merge the fleece with the fabric and sew all sides except one short side.

– Turn a rectangle right side up and stuff it into the other rectangle that is still upside down.

– Match the top edges and sew it around. Leave some space to turn.

– Turn everything right side up and stuff the square of the inner lining into the outer square

– Fold it flat and sew around the top.

ConclusionA close-up of the hands of someone sewing a gift using their sewing machine.

Do you know how to sew? Do you know someone who can? If you answered yes to either of these questions, you will never run out of thoughtful gifts to give to friends and family. There are so many things you can sew for different occasions. It doesn’t matter if it’s a birthday, Christmas, Halloween, or you are in the spirit of giving gifts without an occasion, hand-sewn gifts will always do the trick. Take inspiration from our list and sew!

Source link

Horror as mother finds a SEWING NEEDLE in a Kmart pram toy she bought for her baby to play with

By Sewing needle

Horror as mother finds a SEWING NEEDLE in a Kmart pram toy she bought for her baby to play with

  • Cairns mother horrified after finding needle in Kmart children’s toy
  • The woman shared a photo online and urged parents to verify their purchases
  • The parent said she emailed the retail giant and was waiting for a response

A horrified mother urged parents to check their purchases for hidden dangers after discovering a sewing needle in a Kmart pram toy.

A Cairns mother urged parents to inspect their children’s toys for hidden dangers after finding a sewing needle (pictured) lodged in a pram hanger she bought from Kmart

The Cairns woman bought an Anko-branded stroller hanger from the retail giant for her baby to play with.

But once she had already taken it home, she found a sharp needle lodged in a fabric bird.

“I found this needle in a stroller hanger,” she wrote on Facebook, alongside a photo of the needle.

‘Bub was playing with it and I felt something hard in the bird.

“I thought I didn’t cut the plastic properly, so I waved it around a bit and pulled out this needle.

“Looks like a manufacturer’s mistake with the machine because the needle is broken at the top, but I just wanted to put a post just in case.

“Please check yours if you have one.” “

The worried mother said she contacted Kmart.

A Kmart spokesperson told Daily Mail Australia the incident was under investigation.

“At Kmart, the health and safety of all of our products is our number one priority,” they said.

“We are extremely concerned to learn of this and are in direct contact with the customer to further investigate to understand the source of the identified article. ”

The woman said she discovered the needle after feeling something hard inside a fabric bird (pictured) while her baby played with it

The woman said she discovered the needle after feeling something hard inside a fabric bird (pictured) while her baby played with it


Source link

Lincoln’s Bernina Sewing Center | Couture | Lincoln, NE | sewing | sewing machine | Lincoln, NE

By Sewing machine

About the Lincoln Bernina Sewing Center | Couture | Lincoln, NE

Bernina Sewing Center is the number one resource in Lincoln for all of your sewing needs! NOTNot only will one still find a large selection of the highest quality cotton fabrics, threads and accessories, the most popular designer fabric lines, a wide selection of Bernina sewing machines for sewing, quilting and embroidery, long-arm quilting services and year-round sewing courses and events.

We pride ourselves on providing exceptional customer service. Many years of experience in the sewing and quilting industry along with our exceptional reputation have made the Bernina Sewing Center one of Lincoln’s finest sewing stores. This means not only selling tailoring products and services, but providing a welcoming venue filled with visually colorful inspiration and friendly, knowledgeable staff who inspire creativity and confidence from the moment you step inside.

Our advanced sewing products and professional staff make the Bernina Sewing Center a destination for beginners to advanced sewing professionals. Stop by and find out all we have to offer.

The Bernina Sewing Center of Lincoln is proud to be able to help local residents with all of their sewing needs!

Lincoln’s Bernina Sewing Center is your source for the sale and service of high quality sewing machines.

In addition to our wide range of domestic and industrial machines, we offer a wide variety of sewing accessories. You will find a wide selection of designer fabrics, sewing items, spare parts, accessories, sewing cabinets and embroidery software to make your sewing experience more productive and enjoyable. With a friendly store atmosphere and a team of knowledgeable and enthusiastic staff members, our goal is to inspire creativity, innovation and the expression of ideas through tailoring. We are committed to building successful and long-term relationships with our customers through the products and services we provide.

Our goal is to provide you with the products, services and support that will fuel your creativity and help you achieve your favorite sewing and quilting projects. Come see the best selection of sewing machines in Lincoln!

Source link

Family-owned sewing machine company proud to support NHS during pandemic

By Sewing machine

A long-established family business is proud to support hospitals throughout the pandemic.

Allan Sheen Sewing Machines repaired sewing machines and supplied thread to volunteers busy making scrubs for NHS heroes.

The Winsford store was also inundated with requests for wool to knit tiny hats and cardigans for premature babies.

“We have sold a lot of yarn for knitting,” said Jonathan Sheen, whose late father Allan founded the company almost 40 years ago.

Jonathan Sheen greets customers time and time again and does his best to help everyone

“A lot of people stuck at home have chosen knitting and crochet as a new hobby. We have clients of all ages, young and old.”

The shop remained closed during the lockdown. Jonathan was working from home to make postal deliveries and customers were able to collect their supplies at a safe social distance.

Demand for sewing machines has also skyrocketed as the pandemic hit production and imports.

“It made us feel good,” said Jonathan, 47, who runs the business with his mechanic brother Darren, 49. “People who didn’t know us before come back time and time again and we do our best to help them.”

Father mechanic Allan, who worked in sewing factories, started the business from the front room of the family home with his wife Pamela in Chester Road.

“It was a big daddy dream,” Jonathan said. “He didn’t have a lot of money when he left the factory, but luckily things started to improve.

“He got bigger and bigger. He had a stall in the market and me and my brother helped him on Saturday.”

After moving to a corner store in Well Street, Allan took over their current premises in High Street.

READ> Advisers pledge to honor Winsford’s war heroes amid coronavirus regulations

Winsford goalkeeper:

Jonathan Sheen says store is quickly running out of space and wants to expand

Allan sadly passed away suddenly at home in 2009 at the age of 65. Pamela, 75, retired three years ago.

“Dad was a well-known figure in the sewing machine world,” said Jonathan, who stocks all kinds of haberdashery and is a registered dealer for Janome. “He was a member of the International Sewing Machine Collectors Society and used to go to conventions with mom. He was forward thinking.

“He took risks. The old man who lived next door gave Dad our store and two other stores and he paid them over 10 years.

“We’re running out of space now. I’m going up on the roof with knitting yarn,” Jonathan said. “The pandemic has been bad for others but good for us.

“We want to expand this store.”

Source link

The story of a family and a Singer sewing machine (Number: 2261060 490260)

By Sewing machine

A lady from Beeston told this story …

It’s 1886, in a small town called Wolverton near Northampton, there lived a thirteen-year-old girl, Miss Edith Rock, and Edith had just completed her limited education.

However, she had shown an interest in all kinds of needlework and was very skilled in whatever she attempted. to encourage their daughter’s independence, her parents bought her a “Singer sewing machine”. The model was known as the “Table Top”, it was dual-functioning, the operator could work by hand or have his hands free and work by a pedal from below.

During the late 1880s and early 1890s, the machine was in constant use. Therefore, with progress, Edith rented two small rooms, the front room as a haberdashery (drapery shop) and the back room where the machine was set up for her work.

In 1897 Edith, then twenty-four years old, had met and married a certain Edwin Mackerness (Ted). He helped Edith acquire much larger premises, now owned and not let, in Church Street, Wolverton. Another “singer” was purchased and a young woman was hired to help with the sewing and serve in the shop, although only Edith herself used the “table top”. With the machine still in use, tailoring progressed and the drapery shop continued to thrive, a card printed for this business still survives with the machine.

In June 1901 Edith had a baby boy, the clothes for him being machine-turned. Six weeks later, her stepmother gave birth to a baby girl. Bearing the same last name and being baptized “Edith”, there were now two Edith Mackerness “to figure in the life of the machine.

Over the years, the second Edith learned to use the machine, the only person allowed except the first Edith.
During World War I, our machine produced military underwear. In the roaring twenties and the machine, now back to production of light civilian clothing, it was mostly underwear, with the occasional dress “made to order” for “Better Off” customers.

By 1938, the first Edith Mackerness had reached her mid-sixties and, with failing eyesight and arthritic hands, decided to retire. The machine was passed on to the second Edith, now Edith Rollings, married to a daughter born in 1933, and living near Wolverton in Stony Stratford.

So now the machine has a change of location, a change of owner, and less work, being mainly for home use only for family and friends. The fabric was difficult to find during WWII, but Edith was able to find “parachute silk”. She used it to make a dress for her seven-year-old daughter. The white fabric has been brightened up with a colored binding at the collar and sleeves, with a matching color belt; I remember it well because I am that seven year old girl, now eighty-six years old.

I moved to Leeds (Beeston) in 1980 and in 1983 the ‘Singer’ arrived in the north after the death of my mother, the second Edith, at the age of eighty-two.

Following in my family’s footsteps, I was taught how to use the machine during my teenage years, it had been many years since I had seen it, let alone use it, and the first thing I learned about was put was how to put it on. Leeds being a city with links to the clothing trade most of my friends had a sewing machine, but the newer models with a bobbin mine had a shuttle and that’s where the difference is. The shuttle was about an inch long, pointed at one end, resembling an open rowing boat. To accompany the shuttle, there are several small axles about an inch long, each of which could be clipped into the shuttle.

The shuttle had a row of holes on one side with a bar underneath, and when threading the thread had to go back and forth from one hole to the other, then under the bar there was a set sequence through the holes and if you got it wrong, nothing worked. Fortunately, the second Edith had written instructions on a sheet of paper (now brown with age) and once followed, the “Singer” was in action again; no longer making clothes but retouching and shortening, skirts, pants, etc. and on one occasion making curtains and sewing on ‘Rufflette Tape’.

Everything went well until the late 1980s when I went out and bought more needles, only to tell myself that they were soon becoming obsolete. The seller only had seven in stock, so I took the seven (of which there are still six left). Then in the early 90s it was realized that the machine, although the seam did not lock up and a pull on the thread meant that whatever had just been sewn came undone immediately.

A resident of Beeston, skilled and known for repairing sewing machines, was called in. He did not find anything abnormal with the mechanism, when he noticed that I had threaded the machine with a fine “polyester thread”! Apparently that was all I could have bought, but the ‘Singer’ was designed to work only with Sylko Grade 40 and the newer polyester yarns were way too thin. Unfortunately, Sylko was no longer in production, the Company having disappeared.

So, finally, after 100 years and probably a lot more, the machine is retired, not dead, because it is still functional, with the right equipment, but forced to sleep.

This post was written by Ken burton

We encourage anyone living or working in South Leeds to use this website to share their news. You can either use the Create an article for South Leeds Life page, or send us an email at:

Source link